The sensor temperature analysis provides an overview of temperature trends for sensors and helps monitor limits and track alarms. This feature is available under Hygiene Management → Reports → Sensor Temperature.
Accessing the analysis
- Go to Hygiene Management → Reports → Sensor Temperature.
- The view displays temperature data for the selected sensors within the chosen time range.
Value representation in the analysis view
There are four different status indicators:
- Normal value
- The measured temperature is within the defined limits.
- No action required.
- Temperature not available
- No temperature data is available for the selected period.
- Possible reasons: sensor offline, no measurement recorded.
- Snoozed
- The alarm has been muted for this period.
- No alarm will be triggered, even if the temperature is out of range.
- Temperature out of limit (alarm triggered)
- The temperature has exceeded the defined limits.
- An alarm has been triggered and is visible in the alarm history.
Filter settings and display
- If the selected filter covers more than 24 hours, daily values will be displayed.
- For a filter of 24 hours or less, hourly values are shown.
Navigation
- Clicking on the sensor name will take you directly to the sensor detail page.
Tip:
Use the filter options to analyze specific time periods and identify trends.
